NORMAL POWER-UP PROCEDURE
61202156L2-1
At this point, the unit initialization procedure is conclud-
ed. If the unit is to be configured remotely, there are no
additional items necessary to complete prior to executing
remote configuration.
The Passcode, the Unit ID, and the Control Port settings
are stored in a nonvolatile memory. This ensures they are
operable for subsequent power-up sequences.
After the unit has been put into operation with the initial
power-up and initialization, subsequent power-up proce-
dure includes only the Power-Up self-test followed by the
request for a passcode (password) if this option was se-
lected during initialization.
Type the previously recorded passcode and press
TDU 120e User Manual
Chapter 2. Installation
.
Enter
2-11