Functional Restrictions For Windows Vista And Windows 7 - Omron CX-PROGRAMMER V9 Operation Manual

PART 1: CX-Programmer
CHAPTER 1 – Technical Specifications

Functional Restrictions for Windows Vista and Windows 7

The following functional restrictions exist when running the CX-Programmer on Windows Vista or
Windows 7.
•
Online connections to PLCs on Controller Link networks are not possible through a Controller Link
Support Board when Controller Link is selected as the network type.
•
Online connections to PLCs on SYSMAC LINK networks are not possible through a SYSMAC LINK
Support Board when SYSMAC LINK is selected as the network type.
•
Online connections to PLCs on SYSMAC NET networks are not possible through a SYSMAC NET
Support Board when SYSMAC NET is selected as the network type.
•
Online connections to CS1 Boards in computers are not possible when "CS1 board" is selected as the
network type.
•
Online connections to SYSMAC Boards in computers are not possible when "SYSMAC Board" is
selected as the network type.
•
Online connections to PLCs on the network are not possible when FinsGateway is selected as the
network type.
CX-Programmer _Page 4
OMRON