Omron CX-PROGRAMMER V9 Operation Manual page 135

PART 1: CX-Programmer
CHAPTER 3 – Project Reference
Note: The following printing functions are supported.
• Printing Ladder Programs as Shown on Screen
Sections of the ladder program can be printed separately as they are shown on the screen. Select to
print the ladder screen in the page setting. The ladder screen can be printed as it is shown on the ladder
screen. The program can also be printed at a slightly smaller size (Reduced size), or a slightly larger
size (Enlarged size), instead of the standard size (Normal size).
• Printing Word Address Cross-references
Printing with cross-reference information also includes the cross-reference of the word address.
Therefore, by viewing the printed program, information that is equivalent to that from the CX-
Programmer's cross-reference function can be obtained even if a CX-Programmer is not onsite.
Manipulating Views
Each view in the main window (including the windows displayed when an object in the Project tree has been
opened) has an associated context sensitive menu, displayed by clicking the right-mouse button. Certain
common options on these menus control the positioning and display of the associated view. There are
restrictions on the positioning of some windows.
♦ Float. The selected window expands to full screen width. Select the Float option to expand the window.
♦ Dock. Moves the window left, right, to the top, or to the bottom. Select the Dock option to return the view
to its previous size.
♦ Hide. All views can be hidden except the Diagram window (although all can be closed). Select the
associated icon from the Toolbars option from the View menu to redisplay the view.
♦ Expand All. Expands the project hierarchy to show all components. This option is only available from the
project workspace context sensitive menu (i.e. ensure that a component has not been selected).
Windows that have not been maximized display the following bar at the top or side of the window. Selecting
these buttons allow the window to be moved or closed respectively.
CX-Programmer _Page 52
2. Select the Margins tab and enter the desired top, bottom and edge margins in the Top
field, Bottom field, Left field, Right field, Header field and Footer field.
3. Select the Header or Footer tab. Enter text in the Left, Center and Right fields.
Predefined text can be entered by selecting the Insert Field pushbutton – Date, Time,
Title, Filename, Page Number, etc.
4. Select the Pen and Paper tab and select the Set Font pushbutton to select the desired
font in which the header and footer are to be printed.
5. Select the Print Setup pushbutton to correctly set up printer settings. Refer to the
associated Printers Operating Manual for further information.
6. Select the Print Utility Settings tab and select the Print Utility Settings pushbutton to
set the layout for printing ladder programs and Cross Reference Table. Press Help
pushbutton on the Print Layout Settings dialog for more information.
7. Select the OK pushbutton and close the Print Layout Settings dialog.
8. Select the OK pushbutton of the Page Setup dialog to continue.
9. Select the Print Preview button from the toolbar, if required. The Preview dialog is
displayed. The Target Print Rung dialog is displayed when ladder programs are print
previewed or printed. Select the number of rungs to print/print preview.
The following functions can be accessed.
Select the Next Page pushbutton or Prev Page pushbutton to navigate through the
pages of the printout.
Select the Two Page pushbutton to view two pages of the printout at once. This
pushbutton then changes to the One Page pushbutton to revert.
Select the Zoom In or Zoom Out pushbuttons to magnify or expand the view of the
printout.
Select the Close pushbutton to close the dialog.
10. Select the Print button from the toolbar. A standard Microsoft Windows Print dialog
defines printer settings and allows print parameters to be entered.
OMRON