Omron CX-PROGRAMMER V9 Operation Manual page 67

OMRON
Version 3.3 Upgrade Information
The following tables outline the changes that have been made from version 3.2 to version 3.3 of the CX-
Programmer.
• CJ1M-CPU11/21 Support Added
There are some restrictions in using the CJ1M-CPU11/21 with the new version of CX-Programmer (version 3.3). These
restrictions will be eliminated in the next version.
Previous version (version 3.2)
The CJ1M-CPU11/21 was not
supported.
Creating a CX-Programmer Project for the CJ1M-CPU11/21
1. On the initial CX-Programmer display, select File – New and then set the Device Type to the CJ1M in
the Change PLC Dialog Box.
2. Click the Settings Button by the Device Type Field and set the CPU Type in the Device Type
Settings Dialog Box as shown below.
The CJ1M-CPU11/21 is supported.
To use the CX-Programmer for the CJ1M-CPU11, set the Device Type to the CJ1M and
the CPU Type to the CPU12. To use the CX-Programmer for the CJ1M-CPU21, set the
Device Type to the CJ1M and the CPU Type to the CPU22.
● CJ1M-CPU11: Set CPU12.
● CJ1M-CPU21: Set CPU22.
Setting Table
Item
CX-Programmer
Ver. 3.3
New version (version 3.3)
CPU Unit Model
Device Type
CPU Type
PART 1: CX-Programmer
CJ1M-CPU11 CJ1M-CPU21
Set CJ1M.
Set CPU12. Set CPU22.
CX-Programmer_Page (xxxiii)