Omron CX-PROGRAMMER V9 Operation Manual page 390

OMRON
2. Select either the PLC Direct Connection or Connection via Gateway Option and click the
Change Settings Button.
The following Change PLC Dialog Box will be displayed.
PLC Direct Connection
1. Set the PLC Model and Network Type of the target PLC.
Note: you can select any network type.
2. Click the OK Button.
The PLC Backup Tool Dialog Box will return and the communications settings
will be applied.
PART 2: CX-Server PLC Tools
CHAPTER 12 – PLC Backup Tool
CX-Server PLC Tools_ Page 147