Omron CX-PROGRAMMER V9 Operation Manual page 299

PART 2: CX-Server PLC Tools
CHAPTER 5 – Data Trace/Time Chart Monitor Component
Setting on [Trace Object]Tab
Set trace object.
1 Select [Trace Object] tab on [Data Trace Configuration] dialog box.
The following screen will appear.
2 Input trace object. The methods of trace object input are the three of the following. Input trace object with
the combination of 1ch data, 2ch data, 4ch data, and bit.
Insert
Paste
Drag & Drop
3 Select data type of trace object.
CX-Server PLC Tools_Page 56
Input methods
[Insert] on right click menu
[Insert] button on tool bar
[Paste] on right click menu.
[Paste] on tool bar
[Ctrl]+[V] key
Select the object for trace, right click
on it and hold the click for drag. Drag
and drop it to trace object tab.
Note: Click on [↑] or [↓] on tool bar to change the order of trace object. Trace result will be
displayed in order of the setting of trace objects.
Note: Select the trace object and [Delete] on right click menu to delete trace object or click on
[Delete] on tool bar or press [Del] key.
Details
Input symbol or address. Input is
possible with search from
Symbol Table.
Copy and paste from Symbol
Table, Ladder View or Watch
Window. Multiple trace objects
can be inserted at the same
time.
Drag can be done from Symbol
Table or Ladder View. Multiple
trace objects can be inserted at
the same time.
OMRON
Notes