Pc To Plc Communications; Uploading Plc Settings; Downloading Plc Settings; Comparing Plc Settings - Omron CX-PROGRAMMER V9 Operation Manual

OMRON
PLC Status
These options determine the status of the PLC.
Append PLC Status on top of IN data - Select this button to Append PLC Status on top of IN data, or choose 'Do
not append PLC Status'.
Do not append PLC Status - Select this button to not append PLC Status on top of IN data, or choose 'Append PLC
Status on top of IN data'.

PC to PLC Communications

The PLC Setup component permits the transferring of data to and from the PLC and allows comparisons to be
made between data stored on the PC and the PLC.

Uploading PLC Settings

The Transfer from PLC option loads the settings from the PLC into the PLC Setup component. Use the following
procedure to upload PLC settings.
1, 2, 3...
The PLC Setup component is refreshed with the details from the PLC.

Downloading PLC Settings

The Transfer to PLC option loads the settings to the PLC. Use the following procedure to download an IO Table.
1, 2, 3...

Comparing PLC Settings

The Verify option compares the settings on the PLC with those on the PLC. This option is helpful to confirm that
a table that has been set up in CX-Server and has been downloaded to the PLC, agrees with how the hardware is
set up. Use the following procedure to compare PLC settings.
1, 2, 3...
Any differences (if any) are displayed in the PLC Setup component.
1. Ensure the PLC is online before activating the PLC Setup component.
2. Select Transfer from PLC from the Options menu. A confirmatory dialog is displayed.
1. Ensure the PLC is online before activating the PLC Setup component.
2. Select Transfer to PLC from the Options menu. A confirmatory dialog is displayed.
1. Ensure the PLC is online before activating the IO Table component.
2. Select Verify from the Options menu.
PART 2: CX-Server PLC Tools
CHAPTER 4 – PLC Setup Component
CX-Server PLC Tools_ Page 49