Omron CX-PROGRAMMER V9 Operation Manual page 360

OMRON
Tag name
(2) <node-param> <node>
(Node No.)
<cpu>
(PLC type)
<cpu-type>
(CPU model)
<status-start-type>
(Status start address,
memory area)
<status-start-ch>
(Status area start
address)
Description
The node No. 1 to 62. An error will be generated if an out-of-range
for the link. value is set when a file is loaded.
The PLC type CS1G, CS1G-H, CS1H, CS1H-H, CJ1G, CJ1G-H,
for the node. CJ1H-H, CJ1M, CS1D-H, CS1D-S, CV500, CV1000,
CV2000, CVM1, CVM1-V2, CQM1H, C200HE,
C200HE-Z, C200HG, C200HG-Z, C200HX, C200HX-Z,
NSB, CS/CJ/CP
The CPU model CS1G: CPU42, CPU43, CPU44, CPU45
for the node.
CS1G-H: CPU42, CPU43, CPU44, CPU45
CS1H: CPU63, CPU64, CPU65, CPU66, CPU67
CS1H-H: CPU63, CPU64, CPU65, CPU66, CPU67
CS1G/CJ1G: CPU44, CPU45
CJ1G-H: CPU42, CPU43, CPU44, CPU45
CJ1H-H: CPU65, CPU66, CPU67
CJ1M, CP1H: Not specified.
CS1D-H: CPU65, CPU67
CS1D-S: CPU42, CPU44, CPU65, CPU67
CV500: Not specified.
CV1000: Not specified.
CV2000: Not specified.
CVM1: CPU01, CPU11, CPU21
CVM1-V2: Not specified.
CQM1H: CPU51, CPU61
C200HE: Not specified.
C200HE-Z: Not specified.
C200HG: Not specified.
C200HG-Z: Not specified.
C200HX: Not specified.
C200HX-Z: Not specified.
C200HX-Z: CPU65, CPU85
NSB: Not specified.
The status start Any of the following memory areas can be specified,
address and the regardless of the PLC type.
memory area.
Initial value: Default (See note.)
CIO: Blank, CIO, or IR
DM: D or DM
LR: L or LR
EM: E + Bank No.
HR: H or HR
AR: A or AR
T/C: T/C
Note: Data link status is stored in the default area. For
details, refer to the Unit's operation manual.
The start The range differs depending on the status area type.
address for the
status area.
PART 2: CX-Server PLC Tools
CHAPTER 10 – Data Links
Set value
CX-Server PLC Tools_ Page 117