Omron CX-PROGRAMMER V9 Operation Manual page 424

OMRON
Transfer to PLC
Transition Area
Transmitter
UDP
Unit number
Units
Unknown
Upload
User Datagram Protocol
Word
The transfer of a program or data from a host (either a computer or a programming
device) to a lower-level (or slave) device.
Contains flags indicating when a transition is ON or OFF
A device which sends out signals.
User Datagram Protocol.
A number identifying an individual component of an OMRON PLC system
configuration.
A component of an OMRON PLC system configuration.
The operating mode of a PLC that cannot be connected to.
See Transfer from PLC.
Protocol which directs information across a network to port numbers rather than to IP
addresses.
A 16 bit unit of data memory.
PART 2: CX-Server PLC Tools
GLOSSARY OF TERMS – CX-Server PLC Tools
CX-Server PLC Tools_ Page 181