Omron CX-PROGRAMMER V9 Operation Manual page 403

PART 2: CX-Server PLC Tools
CHAPTER 12 – PLC Backup Tool
Overview of Procedure
Procedure
1, 2, 3...
CX-Server PLC Tools_Page 160
Select PLC Backup Tool
from the Tools Menu of the
Start
CX-Programmer.
Communi- The communications settings
cations
settings
Check the target PLC in the Confirm Connection Dialog Box and
Select the backup file to restore to the PLC in the Restore to PLC
The data will automatically be compared to the data in the PLC and
To check the restore data before restoring it to the PLC, click the
Restore
Start a tool Button and check the data.
Select the check boxes of the Units to which to restore data and
• Not Selecting the Unit Data
Set the communications settings of the target PLC in the PLC Backup Tool Dialog Box.
1.
Note: When the Restore to PLC Button is clicked, the Tool will connect to the PLC that is
specified in the current communications settings. Check that the target PLC and
network type are correct before performing the restore procedure.
Click the Restore to PLC Button in the PLC Backup Tool Dialog Box.
2.
The following dialog box will be displayed to confirm the target PLC.
Select Programs – OMRON –
CX-One – CX Programmer –
PLC Backup Tool from the
Windows Start Menu.
↓
Click the Communication
Settings Button in the PLC
Backup Tool Dialog Box.
Select the PLC Direct
Connection or Connection via
Gateway Option and click the
are inherited from the
Change Settings Button.
CX-Programmer.
Set the target PLC in the
Change PLC Dialog Box.
(The PLC Backup Tool Dialog
Box will return.)
↓
Click the Restore to PLC Button.
↓
click the OK Button.
↓
Dialog Box.
↓
the results will be displayed.
↓
↓
then click the Start Button.
↓
• Selecting the Unit Data
Select the data to restore.
Click the Start Button.
↓
The data is restored.
↓
↓
↓
↓
↓
↓
Click the Start Button.
OMRON