Omron CX-PROGRAMMER V9 Operation Manual page 302

OMRON
Trace (Continuous)
Parameter Settings of Continuous Data Trace
The following is the procedure for Parameter settings of long and continuous Data Trace.
Show [Data Trace Configuration] dialog box.
1 Select [Data Trace] from [PLC] menu on main window. (when Data Trace window is already open and
Time Chart Monitor is selected, select [Operation]| [Mode]| [Data Trace])
2 Select [Operation]| [Settings] on Data Trace window.
[Data Trace Configuration] dialog box will appear as follows.
Refer to "Parameter Settings of Data Trace for CS/CJ/CP" for the functions of the buttons located at the bottom.
3 Click on the tab of items to be set.
4 Click on [Transfer (PC to PLC)] or [OK] after all settings are done.
The setting details of each tab are described hereinafter.
CHAPTER 5 – Data Trace/Time Chart Monitor Component
PART 2: CX-Server PLC Tools
CX-Server PLC Tools_ Page 59