Flash Rom Backup - Omron CX-PROGRAMMER V9 Operation Manual

OMRON
Refer to Chapter 5 - Advanced Topics for further information.
Note:

Flash ROM Backup

CX-Programmer supports the Monitoring function of Flash ROM Backup for the CS1x-H, CJ1x-H, or CP1H
series of PLCs. When a backup is started for a CS1x-H, CJS1x-H, or CP1H PLC the Backup Monitor dialog is
displayed automatically in online mode, when the option 'Display Backup Monitor Dialog automatically' is
selected on the PLC Properties dialog. It can also be invoked manually from the View | Windows | PLC
Memory Backup Status option.
The dialog is an information only dialog (or modeless) thereby enabling other operations to be executed during
the backup process.
CX-Programmer always monitors the backup status while operating in online mode.
Program Backup status
Close Dialog when complete
to in the Items to Release field. Select the OK pushbutton to accept the settings or select
the Cancel pushbutton to abort the operation.
The user program, Parameter Area, and I/O Memory in the CPU Unit can be cleared to
initialize the CPU Unit by selecting Clear All Memory Areas from the CX-Programmer's
PLC menu or selecting Clear All Memory Areas from the Options menu of the PLC Errors
dialog box.
These operations are possible even if a memory error has not occurred in the PLC (the same as
they are for a Programming Console).
This shows the name of the dialog and the name of the connected PLC.
Title Bar
Warning In this example the PLC memory backup is in progress and the warning
indicates that the PLC must not be powered off if the backup is to be
successful. If the power is removed the memory will be cleared.
Other warnings are:
Storing Program Area....
WARNING: DO NOT POWER OFF PLC DURING BACKUP
Backing up Parameter Area....
WARNING: DO NOT POWER OFF PLC DURING BACKUP
Message Other messages are:
Clearing Program Area....
Storing Program Area....
Backup Complete....
These status bars show the progress of Clearing and Storing the program.
Sectors are memory blocks within the PLC memory. The sector number
information is only displayed when clearing the program and indicates the
number of sectors to be cleared and the sector currently being cleared.
Checking this box will cause the Backup Monitor dialog to close when the
backup is complete (default – unchecked).
PART 1: CX-Programmer
CHAPTER 4 – Reference
CX-Programmer _Page 105