Omron CX-PROGRAMMER V9 Operation Manual page 5

OMRON
About this Manual (W446):
This manual describes the operation of the CX-Programmer and consists of the following three parts.
Note: References within each part are references to the pages or chapters within that part.
Related Manual
For details on the function block functions and ST programming, refer to the CX-Programmer Operation
Manual Function Blocks and Structured Text (Cat. No. W447).
For details on the SFC programming functions, refer to the CX-Programmer Operation Manual SFC (Cat.
No. W469).
For details on procedures for installing the CX-Programmer from the CX-One FA Integrated Tool Package,
refer to the CX-One Setup Manual provided with CX-One.
Cat. No.
W463
CXONE-AL@@C-V4/
AL@@D-V4
WARNING:
•
Part 1: CX-Programmer
This part describes the CX-Programmer software that is a PLC
Programming Device, and also provides the overall precautions and the
version upgrades information.
•
Part 2: CX-Server PLC Tools
This part describes the CX-Server PLC Tools software, which is a
collection of the following components:
PLC Memory, IO Table, PLC Setup, Data Trace/Time Chart Monitor, PLC
Error, Memory Card, PLC-Clock, and CX-Net Network Configuration
(including Data Link Editor and Routing Table).
•
Part 3: CX-Server Runtime
This part describes the CX-Server software that is a communications
middleware.
Model Manual name
CX-One Setup Manual
Failure to read and understand the information provided in this manual may
result in personal injury or death, damage to the product, or product failure.
Please read each chapter in its entirety and be sure you understand the
information provided in the chapter and related chapters before attempting
any of the procedures or operations given.
CX-Programmer – Operation Manual
Contents
Installation and overview of CX-One FA
Integrated Tool Package.
CX-Programmer_Page (
ii)