General Information
Non-Genuine Mode
Toner Remaining Amount
Maintenance Function
Firmware Update
1-20
When the Print Cartridge life has ended, the printer stops accepting print
request (life of the Print Cartridge is counted by the counter in the CRUM).
Print Cartridge Error Information
Print Cartridge
LED Display
Xerox
Xerox
Blinking Red
Non-Xerox Print
Cartridge
Manufacturer
Toner remaining amount can be checked through CentreWare Internet
Services (CWIS), Configuration Page, or Supplies Info Page.
CentreWare IS View
The Main Controller Board firmware can be updated by customers and
service technicians using Windows PC or Macintosh with dedicated utilities.
Firmware updates are available at www.xerox.com/office/support.
Detailed procedures are available in the "Updating Firmware" on page A-3.
Updated Firmware
Main Controller Board
Status Monitor
Red
Replace Toner
Low Toner
Red
Invalid Toner
Windows
Via USB/IEEE1284
Via Network (port 9100)
Available
Phaser 3250 Laser Printer Service Manual
Functionality
Stops printing.
Prints with full
functionality.
Stops printing.
Available