Installing The Printer Driver By Using The Created Setup Disk - Command Mode - Xerox DocuPrint C1618 Operation Manual

3.4.2
Installing the Printer Driver by Using the
Created Setup Disk - Command Mode
If the setup disk has not been created, see "3.1 Installing the Printer Driver with the Same
Settings to Multiple Computers" to create the setup disk.
For Windows NT 4.0/Windows 2000/Windows XP, log on as a user of the administrator group
or as the administrator.
Command line
Parameter
Error Display
This command returns the following completion codes:
Value
0 Completed without error.
1 Incorrect contents in configuration file.
2 Driver file to be installed does not exist.
3 Specified port does not exist.
4 Cannot overwrite the driver file.
5 Unable to add printer.
6 Unable to write to disk.
7 Unable to upgrade.
8 Driver of different version exists.
10 No administrator rights (Windows NT).
-1 Other errors.
SETUP /c ( indicates spacing)
/c Install without displaying
messages.
It can be specified in upper or lower case, single byte
characters.
When you have entered an incorrect parameter, a "Invalid
parameter" dialog box will appear. In this case, click OK to end
the operation.
Explanation
3.4 Starting up in the Command Mode
any dialog boxes or
3
41