Dynamic Addressing (Rarp/Bootp) - Xerox DocuPrint C55 Install Manual

Dynamic Addressing (RARP/BOOTP)

Q U I C K N E T W O R K
The TCP/IP address is assigned automatically by the
Server. Follow the steps below:
1. Power the printer ON and allow time for an IP address
to be assigned by the RARP/BOOTP server (this time
may vary depending on network traffic).
2. Perform the steps contained in the section of this
document entitled Appendix A - Print The Print
Settings Page.
3. Obtain the DocuPrint printer Network Card and
TCP/IP address from the Printer Settings page.
4. Update the RARP/BOOTP server's / etc/ethers and the
/etc/hosts files with a host name, TCP/IP and Network
Card addresses. Consult your UNIX documentation
for more RARP/BOOTP server configuration details.
I N S T A L L G U I D E 63