Paper Through Document Feeder Performance Matrix - Xerox Nuvera User Manual

Expected Paper Handling
Stock Type
Labels

Paper Through Document Feeder Performance Matrix

The Xerox Nuvera can process a wide array of stock types. Use the following topics to learn how each
stock type can be expected to perform in the system.
Tip
If you're having feeding problems through the Document Feeder, all problems can be avoided by
scanning directly from the Document Glass.
Types and Conditions
of Originals
12 x 18 inch originals
10-8
Common Uses
Self-adhesive labels for en-
velopes and packaging
Rating
Do Not Feed
Recommendation
• For all transparencies,
refer to the label on the
tray for correct orienta-
tion.
• When using transparen-
cies with removable
stripes, load with the
stripe down in Tray 1 -
4.
• Do not program 2-
sided.
• For best results, set
Heavy Weight attribute
when programming
Trays 1 - 4.
• Nuvera supports only 8
1/2 x 11" (A4) transpar-
encies.
• Do not program 2-
sided.
• For best results, feed la-
bels into the machine
LEF only.
• Load face-up in Trays 1
- 4.
• For best results, set
Heavy Weight attribute
when programming
Trays 1 - 4.
Notes
A 12x18 inch original actually will travel through the Docu-
ment Feeder, but there is a good chance some information
on the output will be lost. To ensure all image information
from a 12 x 18 inch original is captured, use the Document
Glass.
Note
Xerox ® Nuvera
User Guide and Training Aid (UGTA)
®