Smtp Server - Xerox WorkCentre M20i System Administration Manual

SMTP Server

Use these instructions to configure the Simple Mail Transfer Protocol (SMTP) using
CentreWare Internet Services.
Configure SMTP
To configure SMTP, perform these steps:
Enable CentreWare Internet Services (see "Enabling Internet Services" on page 9-20).
1
At the CentreWare Internet Services Home Page for the WorkCentre M20i, select the
2
[Properties] tab.
Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame,
3
and then select the [+] symbol to the left of the Protocols folder.
Select [SMTP Server] and check the details are correct. If any of the details are incorrect
4
then enter the correct information.
In the Server Information area identify where the directory will be found:
5
Choose whether to use the [IP address] or [Host Name].
Enter the appropriate information.
NOTE: It is recommended that you do not change the standard port number of 25.
Check the [SMTP Server Authentication] box to enable Authentication.
Enter the [Login Name] and [Password].
In the Options area choose the [Maximum Message Size] from the drop-down list.
6
Click the [Apply] button to implement any changes.
7
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
Page 9-22 Xerox WorkCentre M20i System Administration Guide