Enabling or Disabling Auxiliary Access
Auxiliary Access allows a foreign interface board to be recognized.
To enable or disable Auxiliary Access:
1
Press the [Machine Status] button.
2
3
Xerox WorkCentre M20i System Administration Guide
Press
or
until System
Admin Tools is displayed and
press [Enter].
If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
Press
or
until Auxiliary
Access is displayed and press
[Enter].
To enable Auxiliary Access, press
or
until On is displayed
and press [Enter]. Otherwise
display Off and press [Enter].
System Admin Tools
[Passcode Protect]
System Admin Tools
[Auxiliary Access]
Page 11-37