New Drum - Xerox WorkCentre M20i System Administration Manual

New Drum

This function is used to reset the drum counter after a drum has been replaced.
To set the new drum:
1 Press the [Machine Status] button.
2
3
Xerox WorkCentre M20i System Administration Guide
Press or until System
Admin Tools is displayed and
press [Enter].
If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
Press or until New
Drum is displayed and press
[Enter].
To set drum counter to zero,
press or until On is
displayed and press [Enter].
Otherwise display Off and press
[Enter] to exit the selection.
System Admin Tools
[Passcode Protect]
New Drum
[On]
Page 11-17