Xerox WorkCentre M20i System Administration Manual page 35

6
7
After a short period of time, the network will allocate the required addresses.
8 Print a System Data sheet to check the addresses (see the User Guide for printing reports).
Xerox WorkCentre M20i System Administration Guide
Press or until TCP/IP is
displayed and press [Enter].
You can use DHCP or BOOTP
to automatically configure TCP/
IP on the machine.
Press or until the
required setting method is
displayed and press [Enter].
Config Network
[TCP/IP]
TCP/IP
[DHCP]
Page 2-9