Xerox WorkCentre M20i System Administration Manual page 174

5
6
Page 11-6
Press or until
Department Mode is displayed
and press [Enter].
To enable Department Mode,
press or until On is
displayed and press [Enter].
Otherwise display Off and press
[Enter].
Press or until Clear
Department is displayed and
press [Enter].
To clear the Journal, press
until Journal is displayed and
press [Enter].
To remove a Department Code,
press or until Code is
displayed and press [Enter].
Choose All and press [Enter] to
remove all Department Codes.
To remove individual Department
Codes, choose Each, press
[Enter], enter the Department
Number and confirm the removal.
Management
[Department Mode]
Management
[Clear Department]
or
Xerox WorkCentre M20i System Administration Guide