Printing Department Data - Xerox WorkCentre M20i System Administration Manual

Printing Department Data

This setting is used to print two reports, Department Code report and a Department Journal.
To print department data:
1 Press the [Machine Status] button.
2
3
NOTE: The first time that you
access Department, you will be
prompted to enter a master
access code then re-enter it to
confirm the code.
4
Page 11-4
Press or until System
Admin Tools is displayed and
press [Enter].
If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
Press or until
Department is displayed and
press [Enter].
Enter the master access code.
Press or until Print is
displayed and press [Enter].
Press or until the
required report is displayed and
press [Enter].
System Admin Tools
[Passcode Protect]
System Admin Tools
[Department]
Department
[Print]
Xerox WorkCentre M20i System Administration Guide