Ldap Directory - Xerox WorkCentre M20i System Administration Manual

LDAP Directory

Use these instructions to configure the Light Weight Directory Access Protocol (LDAP) using
CentreWare Internet Services.
Configure LDAP
To configure LDAP, perform these steps:
Enable CentreWare Internet Services (see "Enabling Internet Services" on page 9-20).
1
At the CentreWare Internet Services Home Page for the WorkCentre M20i, select the
2
[Properties] tab.
Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame,
3
and then select the [+] symbol to the left of the Protocols folder.
Select [LDAP Directory] and check the details are correct. If any of the details are
4
incorrect then enter the correct information.
In the Server Information area identify where the directory will be found:
5
Choose whether to use the [IP address] or [Host Name].
Enter the appropriate information.
6 In the Optional Information area identify where the directory will be found:
Enter the required information Information.
7 Click the [Apply] button to implement any changes.
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
Xerox WorkCentre M20i System Administration Guide Page 9-21