Setting Alert Notifications - Xerox WorkCentre M20i System Administration Manual

Setting Alert Notifications

Use these instructions to an Email alert notification to be sent for specified alerts.
To set alert notifications, perform these steps:
1 Enable CentreWare Internet Services (see "Enabling Internet Services" on page 11-20).
2 At the CentreWare Internet Services Home Page for the WorkCentre M20i, select the
[Properties] tab.
3 Select the plus symbol [+] to the left of the General Setup folder in the Properties frame.
4 In the Properties frame, within the General Setup folder, select [Alert Notification].
Check the box beside the kind of alert you want notified. These are:
When a paper jam is detected.
When the toner is running low.
When the toner is empty.
When a drum warning occurs.
When the drum needs replacing.
Enter the [Email Address] of the person to receive the notification.
5
Click the [Apply] button to implement any changes.
6
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
Select the [Status] tab and then select [Reset Network Controller] to enable the
7
selection to take effect.
Xerox WorkCentre M20i System Administration Guide Page 11-25