Managing Departments
This setting is used to enable or disable Department Mode and to clear Department data and
codes.
To manage departments:
Press the [Machine Status] button.
1
2
3
NOTE: The first time that you
access Department, you will be
prompted to enter a master
access code then re-enter it to
confirm the code.
4
Xerox WorkCentre M20i System Administration Guide
Press
or
until System
Admin Tools is displayed and
press [Enter].
If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
Press
or
until
Department is displayed and
press [Enter].
Enter the master access code.
Press
or
until
Management is displayed and
press [Enter].
System Admin Tools
[Passcode Protect]
System Admin Tools
[Department]
Department
[Management]
Page 11-5