Guest User Access
This feature allows you to permit a guest user to send an Email.
NOTE: For this feature to be enabled a valid Default From address has to have
been entered and Authentication has to have been enabled.
To enter a guest user:
Press the [Machine Status] button.
1
2
3
4
NOTE: "Guest" is the default
Login ID.
Page 9-16
Press
or
until System
Admin Tools is displayed and
press [Enter].
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
Press
or
until Email
Setup is displayed and press
[Enter].
Press
or
until Guest
User Access is displayed and
press [Enter].
If you want to permit a guest user,
press
or
until On is
displayed and press [Enter].
Enter the Guest User Login ID
and password using the keyboard
and press [Enter].
System Admin Tools
[Passcode Protect]
Email Setup
[Guest User Access]
Guest User Access
[On]
Xerox WorkCentre M20i System Administration Guide