Downloading Postscript Fonts - Xerox WorkCentre M20i System Administration Manual
Xerox workcentre m20i: user guide
Hide thumbs
Also See for WorkCentre M20i:
- User manual (215 pages) ,
- Evaluator manual (16 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Downloading PostScript Fonts
PostScript fonts may be supplied on a CD or downloaded from the internet. Use these
instructions to install PostScript fonts in the WorkCentre M20i. You can also delete individual
fonts, all of the fonts and print a listing.
To install PostScript fonts, perform these steps:
1
Start the ControlCentre application.
2
Select the [PostScript] tab.
Enter your [Admin User Name] and [Password].
Insert the CD or download the upgrade from the internet.
3
Click the [Add] button and enter the file name and location or [Browse] to the location and
4
select the file.
5
To delete an individual font, highlight the font and click the [Delete] button.
6
To delete all fonts, click the [Delete All] button.
7
To print a list of installed fonts, click the [Print List] button.
Page 11-36
Xerox WorkCentre M20i System Administration Guide
Advertisement
Table of Contents
