Xerox WorkCentre M24 Quick Start Manual

Online
Indicator lights when data is
being received from a client.

Job Memory

Indicator lights when data is
stored in the machine's memory.

Features

Allows you to display features settings to pro-
gram a copy job. It also allows you to alternate
between scanning and copying feature screens.

Job Status

Allows you to check or cancel jobs currently
executing, or to check or print saved documents.

Machine Status

Allows you to check the
machine status, meters, the state of
consumables, and output reports.
Access
Use this administrator level feature to change machine default settings,
and to setup or modify user accounts.
Speed
Dialing
Enter # and a two
digit number using
Pause

numeric keypad.

One pause is three
seconds. You can

Clear

enter pauses of six
Clears an incorrect
seconds, nine
numeric.
seconds, etc. by
additional button
presses
Numeric Keypad
Is used to enter copy quantity or other numeric information.
Control Panel - 1 of 2

Power Saver

Lights up green and is initiated automatically if the machine is left idle
for a specific amount of time. Press the Power Saver button to bring
the machine back to full power after the warm-up period.

Clear All

Returns the machine to the original Default State. When the Clear All
button is selected in Interrupt mode, default settings are applied only to
the interrupting job.

Interrupt

Stops the printer/copier during the current job. This allows another job
to be run.

Stop

Pressing Stop will halt the copy job in process at the completion of the
current activity. A message asking if you want to press Start to contin-
ue the job or Clear All to cancel the job is displayed on the Touch
Screen.

Start

Initiates a job or continues the copying
process.