Xerox WorkCentre M20i System Administration Manual page 214

Xerox workcentre m20i: user guide
Hide thumbs Also See for WorkCentre M20i:
Table of Contents

Advertisement

Server Advertising
Protocol
SPX
Subnet Mask
TCP/IP
TIFF
Twisted-pair
WAN
Wide Area Network
Page 13-4
See SAP.
An acronym for Sequenced Packet Exchange. SPX is part of NetWare. It ensures
that packets are received in the correct order and that there are no errors.
There are approximately 4.3 billion different addresses in the IP Address range of
000.000.000.000 to 255.255.255.255. These addresses can be divided into
smaller, and much more manageable subnetworks, or subnets. The Subnet Mask
identifies which part of the IP Address contains the Subnet Address and which part
contains the host (or device) address.
An acronym for Transmission Control Protocol / Internet Protocol. TCP/IP is a set of
communications protocols that is supported by a variety of computer platforms.
TCP controls the data transfer and IP controls the routing of the data. The IP
Address is a unique address that identifies a device in a network. The IP Address
has to be set in the WorkCentre M20i by the System Administrator. The IP Address
consists of four bytes of information and is expressed as decimal numbers with the
bytes separated by dots.
(Example: 13.1.188.2)
An acronym for Tagged Image File Format. A standard file format commonly used
for scanning. Images scanned with the WorkCentre M20i are captured in a TIFF 6.0
file format.
See 10BaseT.
An acronym for Wide Area Network. This is a network that serves a relatively large
area, such as buildings in different cities and requires telecommunications services
to reach all the nodes. See also LAN.
See WAN.
Xerox WorkCentre M20i System Administration Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

M20 - workcentre b/w laser

Table of Contents