Information Checklist; Glossary - Xerox WorkCentre M20i System Administration Manual

Information Checklist

Before starting the basic network installation procedures, please ensure the following items
are available or have been performed:
An existing operational network utilizing TCP/IP is required, these
procedures are not designed to install a network.
A suitable network cable.
If you are going to configure TCP/IP manually, you need to obtain and
record the following information:
• TCP/IP Address:
• Gateway Address:
• Subnet Mask Address:
• Primary DNS Server Address:
Refer to the Glossary for additional information on the Gateway
Address, Subnet Mask Address and Primary DNS, if needed.
Test the WorkCentre M20i to ensure it is installed fully and functioning
correctly.
WorkCentre M20i print and fax drivers.
If problems are encountered during the WorkCentre M20i installation, refer to the Problem
Solving chapter for assistance.
CAUTION: Do not connect the network cable to the WorkCentre M20i until instructed
to do so.
Page 2-2
Item
Customer
Customer
Customer
Customer
Xerox
Xerox WorkCentre M20i System Administration Guide
By