Set Factory Defaults - Xerox WorkCentre M20i System Administration Manual

Set Factory Defaults

To reset the factory defaults:
1 Press the [Machine Status] button.
2
3
4
Page 11-12
Press or until System
Admin Tools is displayed and
press [Enter].
If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
Press or until Network
Setup is displayed and press
[Enter].
Press or until Factory
Default is displayed and press
[Enter].
System Admin Tools
[Passcode Protect]
System Admin Tools
[Network Setup]
Network Setup
[Factory Defaults]
Xerox WorkCentre M20i System Administration Guide