Network Tools; Reset Nic - Xerox WorkCentre M20i System Administration Manual

Network Tools

Three tools are provided for the network:
Reset NIC - resets the network card after changes have been implemented.
Factory Defaults- restores all settings to their factory state.
Print System Data - provides you with a hard copy of the network settings.

Reset NIC

To reset the network card:
Press the [Machine Status] button.
1
2
3
4
Xerox WorkCentre M20i System Administration Guide
Press or until System
Admin Tools is displayed and
press [Enter].
If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
Press or until Network
Setup is displayed and press
[Enter].
Press or until Reset NIC
is displayed and press [Enter].
Choose Yes to reset the network
card.
System Admin Tools
[Passcode Protect]
System Admin Tools
[Network Setup]
Network Setup
[Reset NIC]
Page 11-11