Defining the Printer
Use these instructions to change the printer's name and location.
To define the printer, perform these steps:
1
Enable CentreWare Internet Services (see "Enabling Internet Services" on page 11-20).
2
At the CentreWare Internet Services Home Page for the WorkCentre M20i, select the
[Properties] tab.
3
Enter the [Machine Name], but only if necessary.
4
Enter the [Machine Location], if required.
Click the [Apply] button to implement any changes.
5
NOTE: Click the [Undo] button to cancel any changes made and return to the
previous values.
Select the [Status] tab and then select [Reset Network Controller] to enable the
6
selection to take effect.
Xerox WorkCentre M20i System Administration Guide
Page 11-23