Completion Of Embroidery - TAJIMA TFMX-IIC User Manual

Embroidery starts
[Head without thread breakage (In case of 2 or more heads machine)]
The machine restarts embroidering from the position 3 next to where frame back started. This example
is for the case "Frame Back All head Sew" is set as "0".(→p.150)
Frame Back
To make the head without thread breakage embroider from the position where frame back is stopped,
set the tension base switch of the head to the "Top" once (when you release the switch, it will return to
the original position).
Tension base switch
7-4.

Completion of embroidery

Destination of the frame movement differs depending on setting of the machine.
The frame will move to the offset start position.
Embroidery direction
Block
3
Position where Frame Back started
(position where the machine stopped)
Thread breakage indicator lamp will
change color from green to red.
Setting of Automatic Offset
Yes No
The frame will not move.
However, when Automatic Origin Return is set,
the frame will move to the design start position.
Chapter 4
1
2
3
4
5
6
7
8
9
10
11
75