TAJIMA TFMX-IIC User Manual page 56

Registration of a design into the machine memory
How to operate
3-1-2.
The following is an example of registering a design saved in the USB memory into the machine memory.
To set USB memory
(1)
(2) To open screen
To select a design
(3)
The operation differs depending on the storing place of the design.
(a) Design in folder
(b) Design on screen
42
Pay attention to
the direction !
4 Data Input (USB)
T3
G001.TCF
TAJIMA_W
14117
Pressing SET will display the folder in the
first level or design.
To return to the original level, press E
key.
G001.TCF
TAJIMA_W
14117
Pressing i key will display the design
confirmation screen.(→p.29)
To return to the original screen, press E
key.
Chapter 4