To Lower The Needle Bar To Adjust The Frame Position (Needle Bar Operation) - TAJIMA TFMX-IIC User Manual

Decision of the design start position
5-2.

To lower the needle bar to adjust the frame position (Needle bar operation)

This function does not correspond to TFMX-C, TWMX-C.
Screen
5-2-1.
10 Needle bar operation
5-2-2. How to operate
When performing this operation, do not put your hands etc. near the needle. Moving up/
down of the needle bar could injure you.
The following is an example of lowering the needle bar.
(1) To open screen
To lower needle bar
(2)
58
!
CAUTION
10 Needle bar operation
Down
Up
Up: To raise needle bar
Down: To lower needle bar
Up
Pressing SET key will lower the
needle bars of all heads.
Chapter 4