Table of Contents
Advertisement
To make optional device available for use
To press F3 key
(3)
(4)
Input a design with "Normal"
1-4.
Lochrose embroidery device
This setting makes Lochrose embroidery device available for use. For details of the device, refer to the
separate manual "Lochrose embroidery device".
1-4-1.
Screen
10 Lochrose embroidery device
F3
Before feed
Jump Insertion
After feed
Jump Insertion
Device Up
at frame stepping
Type of device
[a]
L: Equipped to left side
R: Equipped to right side
L+R: Equipped to left and right side
NO: Not to equip
Insert jump before feeding material
[b]
Setting whether or not to insert a non-data jump code automatically before feeding out beads
YES: To insert
When beads can not be sewn effectually, select "YES". However, productivity will be
decreased.
NO: Not to insert
194
10 Network
Normal
L
NO/L/R/L+R
YES
YES/NO
NO
YES/NO
YES
YES/NO
[a]
[b]
[c]
[d]
Chapter 8
NO
Advertisement
Table of Contents
