To Set Data Of The Design Automatically After The Embroidery Is Finished (Automatic Data Set After Finishing Embroidery) - TAJIMA TFMX-IIC User Manual

To increase embroidering efficiency
8-5.
To set data of the design automatically after the embroidery is finished (Automatic Data
Set after finishing embroidery)
This function corresponds to TFMX-C, TWMX-C only.
Screen
8-5-1.
9 Automatic data set after end of embroidery
SET
A
Data deletion
[a] Perform Automatic Data Set of the design embroidered after finishing the embroidery.
YES: To perform
NO: Not to perform
[b] Delete the design automatically after finishing the embroidery.
It is selectable only when [a] is set to NO.
YES: To perform
NO: Not to perform
How to operate
8-5-2.
The following is the example of "Not to perform Automatic Data Set of the design" and "Delete the design
automatically" after finishing the embroidery.
Set to main screen.
(1)
To press A key while pressing SET key
(2)
(3) To press A key
120
0
YES/NO
0
YES/NO
1 Design sort (in memory)
9 Automatic data set after end of embroidery
[a]
[b]
Chapter 5