Table of Contents
Advertisement
To stop the machine
4.
To stop the machine
4-1.
To stop the machine automatically when reaching the set value (Preset Halt)
Explanation on the screen
4-1-1.
6 Preset Halt
Stitch
C
Data
Design
Lubrication
Just before End Code
ATH cleaning
[a]
The machine will stop when counting reaches the number of the set stitches. (Display of 1D2)
The machine will stop when embroidery stitch length reaches the set length (display of 1D2).
[b]
The machine will stop when the number of designs reaches the set numbers. (Display of 1D2).
[c]
The machine will stop when counting reaches the number of set stitches. (Display of OIL)
[d]
When automatic lubrication system is set to "YES", it will not be displayed.
The machine will stop short of the end code by one stitch (display of 1D2).
[e]
YES: To stop
Since embroidery is not finished, it is possible to perform frame back.
NO: Not to stop
[f]
The machine will stop when the number of ATH operation reaches the set numbers. (Display of
1D2).
92
0
0-999999[st]
0
0-99999[cm]
0
0-999[Designs]
10
0-99*10000[st]
NO
YES/NO
1000
500~2000
[a]
[b]
[c]
[d]
[e]
[f]
Chapter 5
Advertisement
Table of Contents
