Table of Contents
Advertisement
Embroidery starts
Restart the embroidery by the following procedure.
Thread the needle, or change the under thread (bobbin case).
(3)
Start the operation after performing Frame Back by several stitches.
(4)
Starting stitches after Frame Back differ between the head with thread breakage and the head without
thread breakage.
[Head with thread breakage]
The machine restarts embroidering from the position where Frame Back stopped (1 in the figure below).
As a result, repair stitches will be performed at the position 2 with missing stitches due to thread
breakage.
Frame Back
74
Threader (accessory)
Attaching to rotary hook
1
Thread broken position
2
Block
Position where Frame Back started
(position where the machine stopped)
Bobbin case
Embroidery direction
Chapter 4
Advertisement
Table of Contents
