To Rotate The Design By 180 Degrees When A Cap Frame Is Equipped (Design Rotation By 180 Degrees On Cap Frame) - TAJIMA TFMX-IIC User Manual

Necessary works after replacing the frame
2-2.
To rotate the design by 180 degrees when a cap frame is equipped
(Design rotation by 180 degrees on Cap Frame)
This function can be set only when "Frame type" is set to "Cap".(→p.152)
It is unnecessary to rotate the design to set data conversion.
2-2-1. Explanation on the screen
1 Design rotation by 180° on Cap Frame
State of design rotating
by 180°
How to operate
2-2-2.
The following is an example of setting of design rotation by 180 degree to "To perform".
Set to main screen.
(1)
(2) To press B key while pressing SET
To make the design rotation by 180 degrees on Cap Frame effective
(3)
1 Design rotation by 180° on Cap Frame
YES
NO
Rotation of a design by 180°
YES: To set
NO: Not to set
Chapter 6
1
2
3
4
5
6
7
8
9
NO
10
11
155