TAJIMA TFMX-IIC User Manual page 168

Necessary works after replacing the frame
To set the frame type to "A. clamp T" (Auto Clamp T), follow the procedure below.
To execute "Frame Origin Memory", follow the procedure below. The frame could hit the
machine depending on the frame position and it might cause the damage of the parts.
Frame origin memory
is executed.
"YES">>SET
154
!
STOP
Press the stop switch
immediately after moving
the frame.
Press E key.
Move the frame to the upper right
position from the center of the
embroidery space by manual frame
travel.
CAUTION
Pressing SET key will move the frame.
Code No. 5C1 will
appear.
Perform operation of "Frame Origin
Memory". (SET+F2)
Upper right position
The center of embroidery space
Chapter 6