Table of Contents
Advertisement
To return the frame to the original position
3-2.
To return moved frame to original position and start operation
(Return the frame after manual frame travel)
This function is effective only when the frame is moved manually after stopping the machine in the middle of
embroidery.
3-2-1.
Screen
6 Return the frame after manual frame travel
3-2-2.
How to operate
The following is an example of returning the frame to the original position and starting the operation.
(1)
Set to main screen.
Press F2 key while pressing SET key.
(2)
(3)
Press F2 key.
To return the frame by operating the bar switch or the start switch, and start the operation.
(4)
1 Max. Revolution Limit
6 Return the frame after manual frame travel NO
YES
NO
Setting to return or not to return the frame
by operating the bar switch or the start
switch
YES:
The frame will return to the original position
and the machine will start operation.
NO:
The frame will not return. The operation
will start from the position after frame
travel.
Chapter 6
1
2
3
4
5
6
7
8
9
10
11
157
Advertisement
Table of Contents
