To Display The Setting Color When Making The Design (Needle Bar Information) - TAJIMA TFMX-IIC User Manual

Functions that must be remembered
11-3.

To display the setting color when making the design (Needle bar information)

11-3-1. Screen
10 Needle Bar Information
How to operate
11-3-2.
The following is the example of displaying the setting color when making the design.
Set to main screen.
(1)
(2) To press B key while pressing SET
To press B key
(3)
(4) To select Yes
138
9 FS mode Lock
9 FS mode Lock
10 Needle Bar Information
YES
NO
YES:
Display the setting color when making the
design.
When the information about the setting
color is not included in the design data, the
setting of "B-10 Needle bar color" will be
effective.
NO:
Display the color being set in "B-10Needle
Bar Color". (→p.137)
NO
Chapter 5
NO