TAJIMA TFMX-IIC User Manual page 84

Embroidery starts
Frame Back
7-2-1.
When performing this operation, do not put your hands etc. on the machine table. Moving
frame could injure you.
Perform setting of Frame Back.(→p.146)
The setting of the machine will become Frame Back automatically at thread breakage.
You want to return the frame for 1 stitch.
(1)
Embroidery direction →
5
TFMX-C, TWMX-C,
TFMX-IIC TYPE-2
TFMX (L)
You want to return the frame for several (2 to 10) stitches.
(2)
Embroidery direction →
5
TFMX-C, TWMX-C,
TFMX-IIC TYPE-2
TFMX (L)
70
!
CAUTION
Current frame position
10 15
The frame will return.
Press the stop switch once.
Move the bar switch to the left, and return it immediately.
Current frame position
10 15
The frame will return.
Keep on pressing the stop switch.
The frame will return stitch by stitch up to 10 stitches.
To stop, release stop switch.
Move the bar switch to the left and hold it in that position.
The frame will return stitch by stitch up to 10 stitches.
To stop, return it to the original position.
Chapter 4