To Repeat At The Same Place (A.s. After Auto Data Set) - TAJIMA TFMX-IIC User Manual

To embroider the same design repeatedly
6-2.

To repeat at the same place (A.S. after Auto Data Set)

This setting makes the machine start automatically after finishing embroidery and embroider the same
design repeatedly.
This function is effective only when "Auto Start (AS)" is set to "YES".(→p.55)
6-2-1. Screen
6 Automatic Start after Automatic Data Set
6-2-2. How to operate
After embroidery is finished, do not put your hands etc. on the table. Automatic start
operation could injure you.
The following is an example that Automatic Start after Automatic Data Set is set.
To open screen
(1)
(2) To set automatic start after automatic data set
!
CAUTION
6 Automatic Start after Automatic Data Set
YES
NO
YES: To set
NO: Not to set (usual setting)
NO
Chapter 5
1
2
3
4
5
6
7
8
9
10
11
103