TAJIMA TFMX-IIC User Manual page 74

Decision of the design start position
How to operate
5-3-2.
There are following two methods.
When performing this operation, do not put your hands etc. on the machine table. Moving
frame could injure you.
(1) To use Frame Travel key
(a) Switch to the main screen
Press E key plural times to switch to the main screen.
(b) To move frame to the design start position
Press any desired key. The frame will move.
Frame Travel key
Left
(2) To use Jog dial/Jog shuttle
(a) Switch to the main screen
Press E key plural times to switch to the main screen.
(b) To decide Frame Travel direction
Press E key to decide the frame travel direction.
It moves vertically.
60
!
CAUTION
Rear
Speed switching key
Right
Front
It moves horizontally.
When you want to change the frame travel speed,
press the speed switching key. The key will be lit/unlit.
Lit: High speed
Unlit: Low speed
Chapter 4