Sequin Device Iv - TAJIMA TFMX-IIC User Manual

To set details of optional device
2-2.

Sequin device IV

The detail of the device will be set.
Screen
2-2-1.
2 Sequin
F3
Sequin (L)
Sequin (R)
Jump Insertion
Device Up at
frame stepping
Sequin chip
feed
Feed amount of sequin chips of device at left side
[a]
Select a value that adds about 1.0 to an external diameter of chip as a rough standard.
Feed amount of sequin chips of the device at the right side
[b]
Select a value that adds about 1.0 to an external diameter of chip as a rough standard.
Insertion of jump data when a sequin chip is sewn on
[c]
Select "YES" when sequin chips are not sewn effectually. However, productivity will be
decreased.
YES: To perform
NO: Not to perform
Moving up of device at frame stepping
[d]
YES: To perform
NO: Not to perform
Selecting "NO" will increase manufacturing efficiency. However, the device
could interfere with the frame resulting in its breakage depending on design or
frame type to use.
Feed out the sequin chip one by one manually.(→p.203)
[e]
The feed amount is the value selected at [a] or [b] described above.
L: Left device
R: Right device
204
4.0
[mm]
2.0 23.0
4.0
2.0 23.0 [mm]
NO
YES/NO
YES
YES/NO
[a]
[b]
[c]
[d]
[e]
!
CAUTION
Chapter 8