TAJIMA TFMX-IIC User Manual page 58

Registration of a design into the machine memory
When some message is written for the design (****.TCF), the below screen will be displayed.
To write the message into the design data (****.TCF), DG/ML by Pulse is necessary.
Message S
Besides, when the data of the design (****.TCF) in which the message is written is set, if i key is
pressed, the detail of the message can be checked.
44
Display after data set
A message will be
displayed.
Message
A message will be displayed.
Display after completion of embroidery
A message will be
displayed.
Message E
Chapter 4